Log In or Request an Account to see pricing and options.
The UV-7B(C) Pressure Gauge Fitting System is used to provide a means of attaching a Pressure gauge to the control valve. It is provided with a 1/8 brass shut off valve and a male quick disconnect fitting. Individual fittings can be purchased to create your own arrangements. Contact EECO for details. Part No. 5706.
This is an accessory for the Control Valve
Contains: Low Pressure Switch N.O./N.C.
Download Files:
Continuing our tradition of providing the elevator industry with innovative quality products, EECO now offers a small, compact hydraulic elevator control valve for residential, LULA & handicapped applications.
The UV-4R has all the performance qualities of larger commercially available hydraulic control valves. Qualities like full leveling in the up and down directions and pressure regulation to maintain constant down speed. Jack ports are provided on both the right and left sides of the valve for easy installation. The UV-4R is capable of handling flow rates of 3 to 35 GPM.
The Pressure Gauge Fitting & Low Pressure Switch System is used to provide a means of attaching a Pressure gauge to the control valve. It is provided with a 1/8 brass shut off valve and a male quick disconnect fitting and a low pressure switch. The option of a N.O or N.O./N.C switch is available. Part No. 5707
Standard mounting arrangements of a pressure gauge fitting with shutoff valve on the Jack side of the check valve on a UV-4R, in accordance to ASME A17.1/CSA B44 3.19.4.5. The flange is part of the valve and is shown for illustration purposes only.
The Pressure Gauge Fitting System is used to provide a means of attaching a Pressure gauge to the control valve. It is provided with a 1/8 brass shut off valve and a male quick disconnect fitting. Individual fittings can be purchased to create your own arrangements. Contact EECO for details. Part No. 5706
Standard mounting arrangements of pressure gauge fittings with shutoff valve on the Jack side of the check valve on a UV-4R, in accordance to ASME A17.1/CSA B44 3.19.4.5. The flange is part of the valve and is shown for illustration purposes only.
A Viton seal replacement kit (P/N 5131V) for your in-service UV-5 series valves).
Since January 2001, all EECO valves have been manufactured with Viton seals. If you are replacing any of the major components listed on this page (which are supplied with Viton seals) in an EECO valve manufactuered prior to January 2001, EECO recommends that you also replace the older valve seals in the remainder of the valve with the newer Viton seals.
Download Files:
This is a complete replacement kit of the solenoid area of the UV-5A, T, or TC Valve.
Contains: Solenoid Plunger Kit, Solenoid Hammer Kit, Solenoid Orifice
This can be ordered as either a single complete replacement kit (P/N 5106V) or as the following individual kits: Soleniod Plunger Tube Kit (P/N 5432), Solenoid Hammer Kit (P/N 5433), or the Solenoid Orifice Kit (P/N 5434). See EECO valve catalogue for parts included in each kit.
Download Files:
This is a replacement kit of the solenoid plunger tubes of the UV-5A, T, or TC Valve.
Contains: Plunger Tubes, and O-rings
Download Files:
This kit is designed to replace existing Bypass Pistons in the field.
Contains: Bypass Piston, O-ring, Spring Cap, and Spring.
NOTE: Bypass Piston or Spring will not work with existing valves older than 2001.
Temperature Compensation Kit: This kit (P/N 5600A-( ) upgrades standard S-series and earlier UV-5A valves currently in service. This upgrade provides Full Temperature Compensation over the entire operational temperature range (80° to 150° F) of the valve. These changes will allow consistent elevator operation by maintaining floor-to-floor travel time and up leveling speed. EECO recommends that when a temperature compensation kit is installed in a valve, the rest of the seals in the rest of the valve also be replaced with high temperature Viton seals using EECO’s standard seal kit 5131V. When ordering a temperature compensation kit and the 5131V seal kit, please have the existing valve size and/or serial number available.
Down Piston Replacement Kit FOR UV-5A & UV-5AT:
Use this replacement kit (P/N 5627A-( ) when replacing the Down Piston Assembly in UV-5A and UV-5AT valves manufactured before November 2005. The new down piston assembly will not fit in the old down closure manufactured prior to this date.
This kit is designed to upgrade existing valves to include Constant Down Speed.
Contains: Down Piston Assy. (5509A-TAB), DSC Closure Assy. (5515-TAB), and Removable Sleeve O-ring (5111V)
This assembly is a replacement Down Piston of a UV-5AT.
Contains: Down Piston Assembly.
NOTE: This assembly must only be used on valves produced after November 2005.
Use Down Piston Upgrade Kit for valves produced prior to November 2005.
EECO Valve Troubleshooting Kit for UV-5AT(C) & UV-5BT(C). Also available for UV-4R and UV-7B(C) Control Valves.
This kit provides parts commonly required during control valve service
Contains: Valve Catalog, Troubleshooting Guide, USB Flash Drive, Combo Wrench, 110vac Coil (Black Wire), 220vac Coil (Black Wire), Dynamic Seal Kit, and Solenoid Kit
This is a part for the tank port of the Control Valve.
Contains: Threaded 90º Street Elbow
This is a replacement part for the UV-4R, UV-5A, T, or TC Valve. Wire color Varies.
Contains: Coil
NOTE: When sold separately specify coil wire color, if available.
Download Files:
This is a replacement part for the UV-4R, UV-5A, T, or TC Valve.
Contains: Coil Cover, Grommet, and Label. Labels vary.
This assembly is a replacement Check Valve of a UV-5A, T, or TC Valve.
Contains: Closure Assembly, Check Poppet Assembly, and Spring
This assembly is a replacement part for the Check Valve of a UV-5A, T, or TC Valve.
Contains: Closure, UL Adjuster, Jamb Nut and O-rings
This assembly is a replacement part for the Check Valve of a UV-5A, T, or TC Valve.
Contains: Check Stem, Plate, V-guide, Lock Nut, and O-rings
This is a replacement part for the Check Valve of a UV-5A, T, or TC Valve.
Contains: Check Spring
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: BP Adjuster, Bypass Closure, Flange, and O-rings
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: Removable Sleeves, and O-rings