Control Valve Parts
Control Valve Parts
These pages contain EECO Valve Parts for all of our Control Valves.
For accessories that fit a particular valve, click on the valve name below.
UV-4R • UV-5AT(C) • UV-7B(C)
These Coil kits are an addition to the valve.
Contains: Coils, Coil Covers, Cover Grommets, Labels, Conduit Plate, Grommet, Screw
NOTE: When a coil kit is sold with a valve the price is reduced for all UV-5AT(C) and UV-5BT(C) valves.
This is an accessory for the Control Valve
Contains: Liquid Filled Gauge, Female Quick Disconnect
This is an accessory for the Control Valve to accept a Pressure Gauge Assembly
Contains: 90º Elbow, Tee, Shutoff Valve, Low Pressure Switch N.O. and Male Quick Disconnect.
This is an accessory for the Control Valve to accept a Pressure Gauge Assembly
Contains: Shutoff Valve, and Male Quick Disconnect
This is an accessory for the Control Valve
Contains: Low Pressure Switch N.O.
This is a replacement part for the pump port of the Control Valve.
NIPPLE PUMP INLET 2" GRV.
Contains: Grooved Nipple.
This is an adapter to convert the jack and/or tank port of the Control Valve to grooved.
ADAPTER 2" GRV UV5AT JACK/TANK
Contains: Grooved Nipple.
The Grooved Adapter Short was designed to convert the Jack and Pump port of the
UV-7B, & UV-7BC control valve from the standard NPT. This adapter threads directly
into each port.
The Grooved Adapter Long was designed to convert the Tank port of the UV-7B, & UV-7BC control valve from the standard NPT. This adapter is installed using the existing pump port flange and hardware.
Used with the UV-7B & UV-7BC Control valves, this Pressure Gauge Fitting & Low Pressure Switch System is used to provide a
means of attaching a Pressure gauge to the control valve. It is provided with a 1/8
brass shut off valve and a male quick disconnect fitting and a low pressure switch.
The option of a N.O or N.O./N.C switch is available. Click Here for details.
Individual fittings can be purchased to create your own arrangements.
See page 75 for more details. Part No. 5707.
Note: This product does not include the Liquid Filled Pressure Gauge Assembly.
The UV-7B(C) Pressure Gauge Fitting System is used to provide a means of attaching a Pressure gauge to the control valve. It is provided with a 1/8 brass shut off valve and a male quick disconnect fitting. Individual fittings can be purchased to create your own arrangements. Contact EECO for details. Part No. 5706.
This is an accessory for the Control Valve
Contains: Low Pressure Switch N.O./N.C.
The Pressure Gauge Fitting & Low Pressure Switch System is used to provide a means of attaching a Pressure gauge to the control valve. It is provided with a 1/8 brass shut off valve and a male quick disconnect fitting and a low pressure switch. The option of a N.O or N.O./N.C switch is available. Part No. 5707
Standard mounting arrangements of a pressure gauge fitting with shutoff valve on the Jack side of the check valve on a UV-4R, in accordance to ASME A17.1/CSA B44 3.19.4.5. The flange is part of the valve and is shown for illustration purposes only.
A Viton seal replacement kit (P/N 5131V) for your in-service UV-5 series valves).
Since January 2001, all EECO valves have been manufactured with Viton seals. If you are replacing any of the major components listed on this page (which are supplied with Viton seals) in an EECO valve manufactuered prior to January 2001, EECO recommends that you also replace the older valve seals in the remainder of the valve with the newer Viton seals.
This is a complete replacement kit of the solenoid area of the UV-5A, T, or TC Valve.
Contains: Solenoid Plunger Kit, Solenoid Hammer Kit, Solenoid Orifice
This can be ordered as either a single complete replacement kit (P/N 5106V) or as the following individual kits: Soleniod Plunger Tube Kit (P/N 5432), Solenoid Hammer Kit (P/N 5433), or the Solenoid Orifice Kit (P/N 5434). See EECO valve catalogue for parts included in each kit.
This is a replacement kit of the solenoid plunger tubes of the UV-5A, T, or TC Valve.
Contains: Plunger Tubes, and O-rings
This kit is designed to replace existing Bypass Pistons in the field.
Contains: Bypass Piston, O-ring, Spring Cap, and Spring.
NOTE: Bypass Piston or Spring will not work with existing valves older than 2001.
Temperature Compensation Kit: This kit (P/N 5600A-( ) upgrades standard S-series and earlier UV-5A valves currently in service. This upgrade provides Full Temperature Compensation over the entire operational temperature range (80° to 150° F) of the valve. These changes will allow consistent elevator operation by maintaining floor-to-floor travel time and up leveling speed. EECO recommends that when a temperature compensation kit is installed in a valve, the rest of the seals in the rest of the valve also be replaced with high temperature Viton seals using EECO’s standard seal kit 5131V. When ordering a temperature compensation kit and the 5131V seal kit, please have the existing valve size and/or serial number available.
Down Piston Replacement Kit FOR UV-5A & UV-5AT:
Use this replacement kit (P/N 5627A-( ) when replacing the Down Piston Assembly in UV-5A and UV-5AT valves manufactured before November 2005. The new down piston assembly will not fit in the old down closure manufactured prior to this date.
This kit is designed to upgrade existing valves to include Constant Down Speed.
Contains: Down Piston Assy. (5509A-TAB), DSC Closure Assy. (5515-TAB), and Removable Sleeve O-ring (5111V)
This assembly is a replacement Down Piston of a UV-5AT.
Contains: Down Piston Assembly.
NOTE: This assembly must only be used on valves produced after November 2005.
Use Down Piston Upgrade Kit for valves produced prior to November 2005.
This is a part for the tank port of the Control Valve.
Contains: Threaded 90º Street Elbow
This is a replacement part for the UV-4R, UV-5A, T, or TC Valve. Wire color Varies.
Contains: Coil
NOTE: When sold separately specify coil wire color, if available.
This is a replacement part for the UV-4R, UV-5A, T, or TC Valve.
Contains: Coil Cover, Grommet, and Label. Labels vary.
This assembly is a replacement Check Valve of a UV-5A, T, or TC Valve.
Contains: Closure Assembly, Check Poppet Assembly, and Spring
This assembly is a replacement part for the Check Valve of a UV-5A, T, or TC Valve.
Contains: Closure, UL Adjuster, Jamb Nut and O-rings
This assembly is a replacement part for the Check Valve of a UV-5A, T, or TC Valve.
Contains: Check Stem, Plate, V-guide, Lock Nut, and O-rings
This is a replacement part for the Check Valve of a UV-5A, T, or TC Valve.
Contains: Check Spring
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: BP Adjuster, Bypass Closure, Flange, and O-rings
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: Removable Sleeves, and O-rings
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: Relief Valve Assembly, and Piston
This is a replacement part for the UV-5A, T, TC, the UV-7B and UV-7BC Valve.
Contains: Manual Lowering Assembly
This is an upgrade part for the UV-5A, T, or TC Valve.
Contains: Self Closing Manual Lowering Assembly
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: UA Adjuster Assembly
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: DC Adjuster Assembly
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: Down Transition Adjuster Assembly
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: Adjuster Assembly for all other adjustments
This is a replacement kit for the UV-5A, T, or TC Valve.
Contains: Cover, Standoff Screw, and Wing Nut
This is a replacement part for attaching the Valve Cover
Contains: Standoff Screw
This is a replacement part to secure the Conduit Plate to the Control Valve
Contains: Conduit Plate Screw
This is an accessory for the Control Valve
Contains: Liquid Filled Gauge
FEMALE QUICK DISCONNECT, 1/8"FEMALE
This is an accessory for the Control Valve
Contains: Female Quick Disconnect
MALE QUICK DISCONNECT, 1/8"FEMALE
This is an accessory for the Control Valve
Contains: Male Quick Disconnect
1/8" SHUT OFF VALVE, MALE X MALE
This is an accessory for the Control Valve
Contains: Shutoff Valve
1/8" 90° ELBOW, MALE X FEMALE
This is an accessory for the Control Valve
Contains: 90O Elbow
This is a complete replacement kit consisting of the O-rings in the Control Valve.
Contains: O-rings
Download File:
UV-7B & BC Viton Seal Kit PDF
This is a complete replacement kit of the solenoid area of the UV-7B, UV-7BC Valve.
Contains: Solenoid Plunger Kit, Solenoid Hammer Kit, Solenoid Orifice
This can be ordered as either a single complete replacement kit (P/N 5106V) or as the following individual kits: Soleniod Plunger Tube Kit (P/N 5431), Solenoid Hammer Kit (P/N 5430), or the Solenoid Orifice Kit (P/N 5429). See EECO valve catalogue or the Technical Info PDF included here for parts included in each kit.
This is a replacement kit of the solenoid orifices of the UV-7B, UV-7BC.
Contains: Orifices, and O-rings
his is a replacement kit of the solenoid hammers of the UV-7B & UV-7BC Valve.
Contains: 2 NO & 2 NC Hammer Bodies, Hammers, and 2 Springs
Contains: 2 N/O & 2 N/C Plunger Tube Assemblies
This kit is designed to replace existing Bypass Pistons in the field.
Contains: Bypass Piston, O-ring, Spring Cap, and Spring.
This assembly is a replacement Down Piston for a UV-7B Control Valve.
Contains: Down Piston Assembly.
This assembly is a replacement Down Piston for a UV-7BC Elevator Control Valve.
Contains: Down Piston Assembly.
A complete seal replacement kit (P/N 8088V) for your in-service UV-4R Control Valve.
This is a replacement kit of the solenoid hammers and orifices for the UV-5A, T, TC, the UV-5BT, and UV-5BTC Valves
Contains: Hammer Bodies, Hammers, Springs, Orifices, and O-rings.
This kit is used to convert an existing, in-service, UV-7B valve into a UV-7BC (Constant Down Speed) valve.
Coil Kit for UV-7B(C) EECO Control Valves. Kit contains 4 coils.
The Flange Down Assembly for UV-7B contains:
Part # 5267 - Bypass/Down Main Speed Adjuster (2 pcs)
Part # 5191BA - Leveling Screw Adjuster Assembly (2 pcs)
Part # 5251 - Down Flange (1 pc)