Control Valve Parts - UV-5A(B)T(C)
UV-5A(B)T(C) Control Valve Parts
These Coil kits are an addition to the valve.
Contains: Coils, Coil Covers, Cover Grommets, Labels, Conduit Plate, Grommet, Screw
NOTE: When a coil kit is sold with a valve the price is reduced for all UV-5AT(C) and UV-5BT(C) valves.
This is an accessory for the Control Valve
Contains: Liquid Filled Gauge, Female Quick Disconnect
This is an accessory for the Control Valve to accept a Pressure Gauge Assembly
Contains: 90º Elbow, Tee, Shutoff Valve, Low Pressure Switch N.O. and Male Quick Disconnect.
This is an accessory for the Control Valve to accept a Pressure Gauge Assembly
Contains: Shutoff Valve, and Male Quick Disconnect
This is an accessory for the Control Valve
Contains: Low Pressure Switch N.O.
This is a replacement part for the pump port of the Control Valve.
NIPPLE PUMP INLET 2" GRV.
Contains: Grooved Nipple.
This is an adapter to convert the jack and/or tank port of the Control Valve to grooved.
ADAPTER 2" GRV UV5AT JACK/TANK
Contains: Grooved Nipple.
This is an accessory for the Control Valve
Contains: Low Pressure Switch N.O./N.C.
A Viton seal replacement kit (P/N 5131V) for your in-service UV-5 series valves).
Since January 2001, all EECO valves have been manufactured with Viton seals. If you are replacing any of the major components listed on this page (which are supplied with Viton seals) in an EECO valve manufactuered prior to January 2001, EECO recommends that you also replace the older valve seals in the remainder of the valve with the newer Viton seals.
This is a complete replacement kit of the solenoid area of the UV-5A, T, or TC Valve.
Contains: Solenoid Plunger Kit, Solenoid Hammer Kit, Solenoid Orifice
This can be ordered as either a single complete replacement kit (P/N 5106V) or as the following individual kits: Soleniod Plunger Tube Kit (P/N 5432), Solenoid Hammer Kit (P/N 5433), or the Solenoid Orifice Kit (P/N 5434). See EECO valve catalogue for parts included in each kit.
This is a replacement kit of the solenoid plunger tubes of the UV-5A, T, or TC Valve.
Contains: Plunger Tubes, and O-rings
This kit is designed to replace existing Bypass Pistons in the field.
Contains: Bypass Piston, O-ring, Spring Cap, and Spring.
NOTE: Bypass Piston or Spring will not work with existing valves older than 2001.
Temperature Compensation Kit: This kit (P/N 5600A-( ) upgrades standard S-series and earlier UV-5A valves currently in service. This upgrade provides Full Temperature Compensation over the entire operational temperature range (80° to 150° F) of the valve. These changes will allow consistent elevator operation by maintaining floor-to-floor travel time and up leveling speed. EECO recommends that when a temperature compensation kit is installed in a valve, the rest of the seals in the rest of the valve also be replaced with high temperature Viton seals using EECO’s standard seal kit 5131V. When ordering a temperature compensation kit and the 5131V seal kit, please have the existing valve size and/or serial number available.
Down Piston Replacement Kit FOR UV-5A & UV-5AT:
Use this replacement kit (P/N 5627A-( ) when replacing the Down Piston Assembly in UV-5A and UV-5AT valves manufactured before November 2005. The new down piston assembly will not fit in the old down closure manufactured prior to this date.
This kit is designed to upgrade existing valves to include Constant Down Speed.
Contains: Down Piston Assy. (5509A-TAB), DSC Closure Assy. (5515-TAB), and Removable Sleeve O-ring (5111V)
This assembly is a replacement Down Piston of a UV-5AT.
Contains: Down Piston Assembly.
NOTE: This assembly must only be used on valves produced after November 2005.
Use Down Piston Upgrade Kit for valves produced prior to November 2005.
This is a part for the tank port of the Control Valve.
Contains: Threaded 90º Street Elbow
This is a replacement part for the UV-4R, UV-5A, T, or TC Valve. Wire color Varies.
Contains: Coil
NOTE: When sold separately specify coil wire color, if available.
This is a replacement part for the UV-4R, UV-5A, T, or TC Valve.
Contains: Coil Cover, Grommet, and Label. Labels vary.
This assembly is a replacement Check Valve of a UV-5A, T, or TC Valve.
Contains: Closure Assembly, Check Poppet Assembly, and Spring
This assembly is a replacement part for the Check Valve of a UV-5A, T, or TC Valve.
Contains: Closure, UL Adjuster, Jamb Nut and O-rings
This assembly is a replacement part for the Check Valve of a UV-5A, T, or TC Valve.
Contains: Check Stem, Plate, V-guide, Lock Nut, and O-rings
This is a replacement part for the Check Valve of a UV-5A, T, or TC Valve.
Contains: Check Spring
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: BP Adjuster, Bypass Closure, Flange, and O-rings
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: Removable Sleeves, and O-rings
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: Relief Valve Assembly, and Piston
This is a replacement part for the UV-5A, T, TC, the UV-7B and UV-7BC Valve.
Contains: Manual Lowering Assembly
This is an upgrade part for the UV-5A, T, or TC Valve.
Contains: Self Closing Manual Lowering Assembly
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: UA Adjuster Assembly
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: DC Adjuster Assembly
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: Down Transition Adjuster Assembly
This is a replacement part for the UV-5A, T, or TC Valve.
Contains: Adjuster Assembly for all other adjustments
This is a replacement kit for the UV-5A, T, or TC Valve.
Contains: Cover, Standoff Screw, and Wing Nut
This is a replacement part for attaching the Valve Cover
Contains: Standoff Screw
This is a replacement part to secure the Conduit Plate to the Control Valve
Contains: Conduit Plate Screw
This is an accessory for the Control Valve
Contains: Liquid Filled Gauge
FEMALE QUICK DISCONNECT, 1/8"FEMALE
This is an accessory for the Control Valve
Contains: Female Quick Disconnect
MALE QUICK DISCONNECT, 1/8"FEMALE
This is an accessory for the Control Valve
Contains: Male Quick Disconnect
1/8" SHUT OFF VALVE, MALE X MALE
This is an accessory for the Control Valve
Contains: Shutoff Valve
1/8" 90° ELBOW, MALE X FEMALE
This is an accessory for the Control Valve
Contains: 90O Elbow
This is a replacement kit of the solenoid hammers and orifices for the UV-5A, T, TC, the UV-5BT, and UV-5BTC Valves
Contains: Hammer Bodies, Hammers, Springs, Orifices, and O-rings.